After placing his beautiful mosaic tile floor and then install fashionable appearance footer 5.25 inches high. As you paint the baseboard to get professional results without spilling ink all over your new mosaic floor tile? The secret is, before installing the base plate on the tile, placing blue painter's tape on the floor in a position so that the footer is in the band of at least 1/4-inch.
Before reaching the point of installation and the new bottom paint, let's talk about the old footer. Before placing your new tile mosaic floor, completely remove the old footer. Even if you like the old stuff, I recommend installing the new material. Thus, you do not have to worry about breaking to remove it. If you have a narrow 3-inch baseboard, you can instantly make a room look more elegant by installing a larger 5.25-inch high-footer. After a long footer is removed, put a floor tile mosaic on the wall. Then when you are ready, installing new baseboard tile. Do not let the old baseboard and tile to the footer.
If you do this, it seems very unprofessional. If you are going to spend time and money to lay new beautiful mosaic tile floor and then do the job properly. Remove the baseboard, wall tiles (it is okay to leave a small gap between the wall and baseboard that is less than footer thickness, typically between 1/8 inch and 1/4 inch, assuming his new baseboard is 5/8 inch or thicker), and then install a new footer 5.25 inches high at the top of the tile. It just looks so much better and more professional.
Installing the ribbon on a mosaic about 1/4 inch from the wall. Then install the base plate directly to tape. Place a second piece of tape on the floor, the first part overlaps with the hair, the entire footer to make sure the tape thickness is wide enough so that you do not slop any paint on the new floor tiles and mosaic mortar. Cat footer with two layers of high-gloss paint color of your favorite (the use of high brightness for all molding trim). I prefer bright white but not pure white. Then, when the paint is dry, use a razor and blades new walking on the edge of the base plate to cut the green ribbon. Angle of the blade slightly for cutting hair ends just below the baseboard. As long as you use a sharp knife fresh (ie, changing the knife after each cut 30 linear feet), the blue ribbon will be cut right and you will not see the tape remains in the footer. This provides a beautiful clean finish. I believe inserting a cassette down before installing the base plate and then install the footer at the top of the recordings in a more professional appearance after painting than if you install the first footer and then put the recording side edge of the base plate. Painting does not look so perfect. This method gives outstanding results Professional without spilling ink all over the beautiful new tile mosaic floor you.